|
Alastairhufc's Queries
|
| Alastairhufc |
Posted on 27-12-2011 20:21
|
Domestique
Posts: 432
Joined: 19-11-2011
PCM$: 200.00
|
Is there anyway to add in roundabouts?
I am trying to make a timetrial where the go down one side of a dual carriage way and then turn on a roundabout and go back down the other side.
Edited by Alastairhufc on 30-12-2011 12:02
|
| |
|
|
| roturn |
Posted on 27-12-2011 21:15
|
Team Manager
Posts: 22246
Joined: 24-11-2007
PCM$: 3900.00
|
No. You can`t ride the same road in both directions without a bigger gap in between.
You have to create two roads totally next to each other for example to create these stages.
Also roundabouts in PCM look horrible imo. |
| |
|
|
| Alastairhufc |
Posted on 27-12-2011 22:30
|
Domestique
Posts: 432
Joined: 19-11-2011
PCM$: 200.00
|
roturn wrote:
No. You can`t ride the same road in both directions without a bigger gap in between.
You have to create two roads totally next to each other for example to create these stages.
Also roundabouts in PCM look horrible imo.
Ah ok, I will need a new time trial route then 
OK, I will avoid them in the future then...
Thanks for your advice on roundabouts
Edited by Alastairhufc on 27-12-2011 22:30
|
| |
|
|
| roturn |
Posted on 27-12-2011 22:32
|
Team Manager
Posts: 22246
Joined: 24-11-2007
PCM$: 3900.00
|
You can download my Murcia 2011 race. the time trial there was also on the same road.
You can see one option how to avoid the problem there.
As it was one of my first races, it`s obviously not looking perfect. |
| |
|
|
| Alastairhufc |
Posted on 27-12-2011 22:54
|
Domestique
Posts: 432
Joined: 19-11-2011
PCM$: 200.00
|
roturn wrote:
You can download my Murcia 2011 race. the time trial there was also on the same road.
You can see one option how to avoid the problem there.
As it was one of my first races, it`s obviously not looking perfect.
Ah ok, I will do that now |
| |
|
|
| Alastairhufc |
Posted on 27-12-2011 23:18
|
Domestique
Posts: 432
Joined: 19-11-2011
PCM$: 200.00
|
Is the way of avoiding it by putting buildings in the middle or did I miss something?
It is the one in the PCMdaily database right? |
| |
|
|
| Alastairhufc |
Posted on 28-12-2011 10:42
|
Domestique
Posts: 432
Joined: 19-11-2011
PCM$: 200.00
|
Also, can you have the start and finish as the same place?
I want you to go the opposite way for the finish
e.g.
Start = -------------->
Finish = <-------------
On the same bit of road, when I do it keeps trying to go round by route twice, once in each direction. |
| |
|
|
| valverde321 |
Posted on 28-12-2011 14:38
|
World Champion
Posts: 12986
Joined: 20-05-2009
PCM$: 530.00
|
Alastairhufc wrote:
Also, can you have the start and finish as the same place?
I want you to go the opposite way for the finish
e.g.
Start = -------------->
Finish = <-------------
On the same bit of road, when I do it keeps trying to go round by route twice, once in each direction. To get the finish in the same place, I'm pretty sure you have to place the Start Line, and then Place the Finish Line directly overtop it.
|
| |
|
|
| Alastairhufc |
Posted on 28-12-2011 14:58
|
Domestique
Posts: 432
Joined: 19-11-2011
PCM$: 200.00
|
valverde321 wrote:
Alastairhufc wrote:
Also, can you have the start and finish as the same place?
I want you to go the opposite way for the finish
e.g.
Start = -------------->
Finish = <-------------
On the same bit of road, when I do it keeps trying to go round by route twice, once in each direction. To get the finish in the same place, I'm pretty sure you have to place the Start Line, and then Place the Finish Line directly overtop it.
Ah ok, thanks for that
I tried that but it wont let me place a start point anywhere. ANy ideas why? |
| |
|
|
| valverde321 |
Posted on 28-12-2011 15:05
|
World Champion
Posts: 12986
Joined: 20-05-2009
PCM$: 530.00
|
Alastairhufc wrote:
valverde321 wrote:
Alastairhufc wrote:
Also, can you have the start and finish as the same place?
I want you to go the opposite way for the finish
e.g.
Start = -------------->
Finish = <-------------
On the same bit of road, when I do it keeps trying to go round by route twice, once in each direction. To get the finish in the same place, I'm pretty sure you have to place the Start Line, and then Place the Finish Line directly overtop it.
Ah ok, thanks for that
I tried that but it wont let me place a start point anywhere. ANy ideas why?
Have you been following any stage making tutorials?
You have to place the route first, and once the route is complete, the start line has to be place 2km away from where the actual route starts. So before you make the stage, just tack on a little section of road that you can use as the extra 2km.
|
| |
|
|
| Alastairhufc |
Posted on 28-12-2011 15:44
|
Domestique
Posts: 432
Joined: 19-11-2011
PCM$: 200.00
|
valverde321 wrote:
Alastairhufc wrote:
valverde321 wrote:
Alastairhufc wrote:
Also, can you have the start and finish as the same place?
I want you to go the opposite way for the finish
e.g.
Start = -------------->
Finish = <-------------
On the same bit of road, when I do it keeps trying to go round by route twice, once in each direction. To get the finish in the same place, I'm pretty sure you have to place the Start Line, and then Place the Finish Line directly overtop it.
Ah ok, thanks for that
I tried that but it wont let me place a start point anywhere. ANy ideas why?
Have you been following any stage making tutorials?
You have to place the route first, and once the route is complete, the start line has to be place 2km away from where the actual route starts. So before you make the stage, just tack on a little section of road that you can use as the extra 2km.
I have used this - https://files.pcmd...Basics.pdf
Does it have to be a straight 2 km? I have a bent one... |
| |
|
|
| Ad Bot |
Posted on 24-11-2024 11:51
|
Bot Agent
Posts: Countless
Joined: 23.11.09
|
|
| IP: None |
|
|
| lluuiiggii |
Posted on 28-12-2011 15:45
|
Grand Tour Champion
Posts: 8542
Joined: 30-07-2010
PCM$: 200.00
|
Doesn't need to be straight. Are you sure you added them in the route as well?
|
| |
|
|
| Pellizotti2 |
Posted on 28-12-2011 15:45
|
World Champion
Posts: 10121
Joined: 01-05-2010
PCM$: 200.00
|
Doesn't matter. Just two kilometres of road, straight or bent.
EDIT: too slow
Edited by Pellizotti2 on 28-12-2011 15:47
|
| |
|
|
| Alastairhufc |
Posted on 28-12-2011 15:52
|
Domestique
Posts: 432
Joined: 19-11-2011
PCM$: 200.00
|
lluuiiggii wrote:
Doesn't need to be straight. Are you sure you added them in the route as well?
Yeah, that was what I wrong, I am trying to sort that now...
Pellizotti2 wrote:
Doesn't matter. Just two kilometres of road, straight or bent.
EDIT: too slow
Ok Thanks |
| |
|
|
| Alastairhufc |
Posted on 28-12-2011 19:50
|
Domestique
Posts: 432
Joined: 19-11-2011
PCM$: 200.00
|
I still can't get it to work despite having 2 km of road so I am confused what I am doing wrong...
Is there a better guide than (https://files.pcmd...Basics.pdf
) or not?
Also, Can you add a race to a career once you have started the career? |
| |
|
|
| lluuiiggii |
Posted on 28-12-2011 19:54
|
Grand Tour Champion
Posts: 8542
Joined: 30-07-2010
PCM$: 200.00
|
Alastairhufc wrote:
I still can't get it to work despite having 2 km of road so I am confused what I am doing wrong...
Is there a better guide than (https://files.pcmd...Basics.pdf
) or not?
Also, Can you add a race to a career once you have started the career?
There is the guide in the Cyanide forum, but it's in French (you can get a medium result with Google Translator).
As for adding a race after you started a career, yes, it's possible, but you should do it in the off-season (between Oct 15 and Jan 1), otherwise you'll have some problems with it.
|
| |
|
|
| Alastairhufc |
Posted on 28-12-2011 20:30
|
Domestique
Posts: 432
Joined: 19-11-2011
PCM$: 200.00
|
lluuiiggii wrote:
Alastairhufc wrote:
I still can't get it to work despite having 2 km of road so I am confused what I am doing wrong...
Is there a better guide than (https://files.pcmd...Basics.pdf
) or not?
Also, Can you add a race to a career once you have started the career?
There is the guide in the Cyanide forum, but it's in French (you can get a medium result with Google Translator).
As for adding a race after you started a career, yes, it's possible, but you should do it in the off-season (between Oct 15 and Jan 1), otherwise you'll have some problems with it.
Ok, I will find it now
So add it for season 2 then
Thanks for you help  |
| |
|
|
| Alastairhufc |
Posted on 29-12-2011 13:53
|
Domestique
Posts: 432
Joined: 19-11-2011
PCM$: 200.00
|
What is the best way to make a three way junction?
I want to have a my start/finish in the same place. It is a straight where you turn left half way down at the start of the race but for the finish you go all the way down it |
| |
|
|
| lluuiiggii |
Posted on 29-12-2011 14:46
|
Grand Tour Champion
Posts: 8542
Joined: 30-07-2010
PCM$: 200.00
|
Alastairhufc wrote:
What is the best way to make a three way junction?
I want to have a my start/finish in the same place. It is a straight where you turn left half way down at the start of the race but for the finish you go all the way down it
Just create the junction with three roads, there is no problem. Only make sure they do not enter the junction too close together, that can create some problems (not sure if this is what you wanted, or if I expressed myself clearly).
|
| |
|
|
| Alastairhufc |
Posted on 29-12-2011 16:36
|
Domestique
Posts: 432
Joined: 19-11-2011
PCM$: 200.00
|
lluuiiggii wrote:
Alastairhufc wrote:
What is the best way to make a three way junction?
I want to have a my start/finish in the same place. It is a straight where you turn left half way down at the start of the race but for the finish you go all the way down it
Just create the junction with three roads, there is no problem. Only make sure they do not enter the junction too close together, that can create some problems (not sure if this is what you wanted, or if I expressed myself clearly).
You expressed yourself clearly
And I am doing that right which is good (I thought that was causing my problem)
My problem is that when I add my route in, it tries to go once round the route in each direction = over 598km 
Any idea what could be causing it to do that? |
| |
|
